My Fall Class at SSA: Sterling PMC

My Fall class at Southwest School of Art is now open for registration.

You may register by phone or online at any time. I am sure you will have a great time and you will learn a lot of things in how to work with this type of clay.

See you there !!

More playing time with Sterling PMC

Finally I had the time to play again in my studio and create jewelry. I have been busy with some personal issues and with lots of paperwork, I really missed playing again !!

I wanted to make a brooch with Sterling PMC .One of my signature pieces, Sacred/Milagro Heart, that I love to create was my option for this brooch. 

This time I change a little my firing schedule on the second stage (charcoal). Instead of firing for 45 minutes like I did in my first time playing with Sterling PMC, I decided I will fired the brooch for 1 and a half hour at 1500F. 

The brooch came out perfectly and I will continue to fire my pieces the longest time I can do for the second stage.

SACRED/MILAGRO Heart
©2012 Lorena Angulo
Sterling PMC

SACRED/MILAGRO Heart (back)
©2012 Lorena Angulo
Sterling PMC

SACRED/MILAGRO Heart (back)
©2012 Lorena Angulo
Sterling PMC

Pin It

Love,

Lorena Angulo

PMC Sterling

I got the great opportunity to play with the new PMC Sterling in November and I will love to share with all of you my experience and what I think about this new type of clay.
The clay looks very similar to the PMC Pro, the color is darker than the original PMC.

When I took the clay out I noticed the texture is great and very easy to work with, I decided to make a ring first and I made a snake with some of the clay to form the band for the ring. I used a plexiglass to make a long snake and I rolled it around a mandrel.

I went 3.5 sizes bigger to get the size I was looking for, a size 9.

I do not used any inserts in my ring when I fired it.

The PMC Sterling has a longer working time than the PMC3 (this is the type of clay I usually use in all my silver work.) In case the clay gets dry, you can add a little water and it gets soft very fast, almost immediately.

Carving is also great in this type of clay, it goes very easy. This is something I was very eager to try since most of my work has carving into the designs.

It carves very smoothly and with no problems at all.

TIP: Always save the carving scraps, these can make a great texture in your work, you will see it in my finished pieces at the end of this post.

Hand sculpting and forming is fantastic because the clay does not dry fast. This gives you the perfect time to hand form flowers or other things. I hand sculpt a lot in my work and I was very happy to see how easy it is to do it with PMC Sterling.

I also made earrings and a pendant. For the earrings I decided to add some fire in place CZs and I embedded two sterling jump rings into each earring.

I used my carving scraps to add texture in my heart pendant.

Because my pieces were more than 3mm thick I decided to fire them to a longer time that the suggested time in the package.

I first fired them in the open shelf, like we do with any other type of PMC (except PMC Pro), fast ramp to 1000F and hold there for 40 minutes. I waited until the pieces were cool inside the kiln; I also waited until the pieces were cool because I had fired two CZ Hessonite Garnets and we always have to be careful not to take the pieces very fast because the change of temperature may crack the stones.

The second firing was done with a steel pot and activated carbon. I added half an inch at the bottom and added my pieces in one layer, covered them with another half an inch and added the top of the pot.

I fired them inside the pot fast ramp to 1500F and hold for 45 minutes.

I left the pieces cool down inside the pot in the kiln before I took them out.

This is how the sterling looks like when you take them out of the kiln

I brushed them with soapy water and a brass brush. After this I added LOS Gel patina and brushed some of the patina off before I added the pieces inside a tumbler. 

I usually use a rotatory tumbler but this time I decided to give it a try to a magnetic tumbler. I was AMAZED at how fast this wonderful polishing machine can give your pieces a beautiful shine. I will have to start saving money to get myself a bigger size, since some of my pieces are bigger and do not fit in this size tumbler I have now. It is worth it !!!

These are all the pieces I made with 25 grams of PMC Sterling. They are not very thin, so if you make pieces that are thinner and small in size you will be able to make more out of the 25 grams of PMC Sterling.

The cost is very similar to the PMC3 and I feel it is great to have it like that. Now you will be able to create pieces that can be mark as .925 (sterling) and they will be stronger than fine silver.

I do want to mention I will be firing for almost two hours on the second step firing of the PMC Sterling. I want to be 100% sure they are totally fired to their best strength. I am saying this because I tested the little Calla Lily and I felt the piece was not fully sintered when I tried to curl up the point of the flower after fired. I will let you know of my future firings.

The pieces are beautiful and easy to polish and I am sure you will enjoy working with it.

EL CORAZON
©2011 Lorena Angulo
PMC Sterling
photo: Speedy Peacock

ROSAS
©2011 Lorena Angulo
PMC Sterling
photo: Speedy Peacock

FLOR
©2011 Lorena Angulo
PMC Sterling, pearls, CZ Hessonite  Garnets, embedded jump rings
photo: Speedy Peacock

Pin It